NSK  LM451349/LM451310 SINGLE-ROW BEARINGS

Housing Material:[Aluminum Alloy] 201; Seals:DD (Contact Rubber S; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; Bearing Material:[Steel] Steel; RoHS:6;

Type:Bearings with Housin; RoHS:6; Bearing Retained:Yes (with retaining; Bearing Retained:Yes (with retaining; Bearing Material:[Steel] Steel; Height Indication:Height Selection; Seals:VV (Non-Contact Rubb; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; Shape:Bottom Mount;

Z:26.6 mm; T max.:100 °C; Weight:3.77 kg; S:11.8 mm; SW:5 mm; A1:22 mm; A2:38 mm; H2:102 mm; L2:19 mm; T min.:-40 °C;

Z:44.3 mm; A:32 mm; G:M6x1; d1:32 mm; L1:61 mm; H:89 mm; T max.:100 °C; Dz:54 mm; H2:51 mm; A2:21 mm;

Unit, Type:Insert Bearing Unit; Fit:J7; Diameter series symbol:Used for Light load; Stroke:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Seal:Triple seals; Fit:J7; Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit Body Material:Cast Iron;

Maximum Capacity / Filling Slot:No; f0:15.6; Internal Clearance:C3-Loose; Mass:0.85 kg; B:22 mm; Weight / LBS:1.91802; Category:Single Row Ball Bear; Dynamic load, C:47.5 kN; ra max:1 mm; Snap Ring:No;

C0:23.7 kN; A5:32.6 mm; N1:19 mm; A2:37 mm; A1:16 mm; Dz:100 mm; L1:90 mm; T min.:-20 °C; SW:5 mm; B:51.6 mm;

B:34 mm; C0:6.65 kN; A1:10 mm; A:29.5 mm; J:63.5 mm; G:R1/8"; B1:43.5 mm; d:12.7 mm; T max.:200 °C; Recommended tightening torque for set screw:3.7 Nm;

Basic Load Rating, Dynamic Rating(N):35100; Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit, Type:Insert Bearing Unit; Days to Ship:8 Days; Stroke:No; Seal:Silicone; Surface Treatment:No; Basic Load Rating, Static Rating(N):23300; RoHS:6; Rolling Element Material:Bearing Steel;

Days to Ship:8 Days; Surface Treatment:No; Unit Body Material:Shaped steel/Groove-; d:65; RoHS:6; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Cylindrical Bore Set; Seal:Silicone; Bearing Inner Dia. Shape:Cylindrical Bore Set; Accessory:No Cover;

RoHS:6; Fit:J7; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):19300; Unit, Type:Insert Bearing Unit; Days to Ship:Quote; Unit Body Material:Cast Iron; Bearing Unit, Type:Take-Up Type; Seal:Silicone; Surface Treatment:No;

E:12.5 mm; C0:15.2 kN; N:M10; H2:93 mm; G:R1/8"; C:25.7 kN; Adapter sleeve reference:H2307-18; Designation of bearing:UK207G2H-18; H1:12 mm; L1:22.5 mm;

B:41.2 mm; Designation of housing:FA209-; Recommended tightening torque for set screw:11.5 Nm; L:108 mm; Weight:1.85 kg; T max.:100 °C; C0:20.8 kN; H:181 mm; s1:20.6 mm; C:31.85 kN;

T max.:100 °C; C0:7.88 kN; d1:37.4 mm; A1:25 mm; Designation of housing:PG205-; G:M6x1; B:34.8 mm; H2:70 mm; B1:44.3 mm; Weight:0.75 kg;

Housing Material:1045 Carbon Steel; Bearing Part Number:6801; RoHS:6; Bearing Used:Deep Groove Ball Bea; Holder Surface Treatment:Black Oxide Coating; Width T(mm):25 ～ 50; Flange O.D. H(φ):44; Number of Bearings:Double; Type:Bearings with Housin; Shape:Flange Type;